问题描述

StoreOnce 3640

目前固件版本为4.3.0

ilo里一直有这个告警:

The iLO health monitoring status of the device / adapter located in Slot 255 is not responsive

收集ahs 日志查看ilo版本为iLO 5 v2.44p17 built on Apr 30 2021

IE 版本不确认

过程分析

HPE 文章：
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00102190en_us ：要求升级ilo 固件到v2.30版本以后

SCOPE

Any HPE system with iLO 5 firmware v2.16 (or earlier).

RESOLUTION

To avoid the false caution messages, update to iLO 5 v2.30. As a workaround, if the system is functioning as expected, ignore the caution messages.

This has been observed on HPE systems with multiple HPE Smart Array controllers installed.

Perform the following to disable the Management Component Transport Protocol (MCTP)and stop the false caution messages:

1. From the iLO 5 management interface: Click System Information in the navigation tree, click the Device Inventory tab. Click Discovery.
2. Disable the MCTP and wait for two minutes. Perform an MCTP factory reset. Enable the MCTP. The device should be displayed again.
3. Reset iLO 5.
4. Reboot the OS.

知了文档：
https://zhiliao.h3c.com/Theme/details/203758 ：要求升级ie固件到 0.2.3.0

解决方法

由于storeonce 是封装系统，不能单独升级ilo及ie 固件，需要通过整体的storeonce 包升级

目前storeonce最新固件bundle 为4.3.5

对应ilo 及ie版本如下：

iLO版本2.72

IE版本是0.2.1.2

此问题需要等待storeonce 新版本发布，查看ilo及IE固件如果达到要求后再做升级。